Installation Systems

Home » Acoustic Products » Absorption » Panel System » Installation Systems
Omega

Omega™ for walls & ceiling planks

Omega™ system components including Omega profile, Middle Clips and Edge Clips, apply to Siuakustik Planks.

1. Mount wood battens or light steel keels on the wall according to the design.

2. Install fiberglass/rock wool between the battens/keels.

3. According to the work drawing, install Omega™ profile on wood batten and put middle/edge clips on profile.

4. Fix Siuakustik Planks one by one, and press clips and panel strength.

Technical Data
AluTrac

AluTrac™ for wall panels Installation

AluTrac™ system components including @101, @102, @103, @118, @109, apply to all Siuperfo or Siu Flat panel, easy and cost-efficient.

1. Mount wood battens or light steel keels on the wall according to the design.

2. Install fiberglass/rock wool between the battens/keels.

3. According to the work drawing, install AluTrac™ profile(@101&@103) and fix Siuperfo/Siuflat panel on the wood batten piece by piece form left to right or from down to up.

4. Corner installation pls refer profile @118 and @109.

Technical Data
SC

Suspended system for ceiling tiles

Siuakustik suspended system for ceiling tiles offer:

  • Exposed Ceiling Installation
  • Concealed Ceiling Installation
Choose / Custom Your Ceiling Now ! Technical Data
HTC

HTC for Heavy duty Panel

Siuakustik HTC-System design for heavy duty panels, you can save about 30% to 40% cost by using our standard specification product. We are very willingly provide relative technology service on cutting and joint.

  • Mount wood battens or light steel keels on the wall according to design requirement. Put fiberglass/rock wool among battens/keels.
  • Fix HTC-002 on the wood batten or light steel keel horizontally. Fix two HTC-001 adjustable clips on the top of the Finished Wood Decorative Panel. Fix two HTC-003 clips on the bottom of the Finished Wood Decorative Panel.
  • Hang up the Finished Wood Decorative Panel from bottom to upper at the middle of the wall. HTC-001 clip with adjustable screw can adjust the height of the decorative panel.
  • Bossy conner and reentrant conner handling method refer to node diagram.
  • NOTE: There aren’t two completely same two veneers on natural veneer laminated products. Completely natural, completely unique. We suggest customer who is strictly to colour and grain consistence apply engineering veneer.

Technical Data